Casio fx-9860G SD - Manual (Page 579)

20050401
α
-1-3
Error Message Table
Meaning Message Countermeasure
No Variable
Com ERROR
Transmit
ERROR
Receive
ERROR
Memory Full
Time Out
Circular ERROR
Please
Reconnect
Too Many Data
Fragmentation
ERROR
Invalid Name
• No variable specified within a
graph function being used for
Dynamic Graph.
• No variable within a Solve
equation.
• Problem with cable connection
or parameter setting during
program data communications.
• Problem with cable connection
or parameter setting during data
communications.
• Problem with cable connection
or parameter setting during data
communications.
• Memory of receiving unit
became full during program
data communications.
• A Solve calculation or integra-
tion calculation was unable to
satisfy convergence conditions.
• There is a circular reference
(such as “=A1” in cell A1) in the
spreadsheet.
• The connection was dropped
for some reason while updating
the operating system.
• The number of data items is too
large.
• Memory must be optimized
before any more data can be
stored.
• The file name you input
includes invalid characters.
• Specify a variable for the graph
function.
• Input a Solve equation that
includes a variable.
• Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are configured correctly.
• Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are configured correctly.
• Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are configured correctly.
• Delete some data stored in the
receiving unit and try again.
• If you are performing a Solve
calculation, try changing to the
initial default estimated value.
• If you are performing an
integration calculation, try
changing to a larger
tol value.
• Change cell contents to
remove the circular references.
• Reconnect and try again.
• Delete unneeded data.
• Optimize memory.
• Use the correct characters to
input a valid file name.