Juniper Systems LandMark Mobile - Manual (Page 62)

LandMark Mobile User’s Manual
Error Message:
Unable to open data exchange file.
This message appears for one of the following reasons:
1. LandMark Mobile cannot open or create the data exchange
file because the disk is full.
2. A third party program has the data exchange file open.
Fix the problem by either deleting files off of the disk, or wait for
the third party program to close the data exchange file.
Error message:
Maximum number of waypoints per file has been reached. EXPORT
button still available for data export.
Waypoint files have a maximum of 256 waypoints per file. This
message appears for the following reason:
1. The maximum number of waypoints has been reached.
The Export button can still be used to export data to another
application, but a new waypoint file must be created if extra
points are stored.
LandMark Mobile Waypoint Screen Error Messages
The following are the error messages and suggested fix for those
messages that may occur when using the LandMark Mobile
Waypoint screen.
Error message:
Waypoint name can be 0 characters or less. Characters after 0 will
be truncated.
This message appears for the following reason:
1. The allotted number of characters (30) for a waypoint name
has been used.
Fix the problem by making the waypoint name shorter.
Error message:
Maximum number of waypoints per file has been reached. Either create
a new waypoint file or delete unused waypoints from the current file.
Every waypoint file has a maximum number of points (256) that can
be entered. This error message appears for the following reason:
1. The maximum number of waypoints per file has been reached.
Fix the problem by creating a new waypoint file or by deleting
unused points from the current file.