beautypg.com

Juniper Systems LandMark Mobile User Manual

Page 53

background image

LandMark Mobile User’s Manual  5

Store WPT

The Store WPT (Store Waypoint) button is used to store an average

waypoint in the current waypoint file. If the Store WPT button

is pressed before the Average button (if the button is available),

the averaging process begins automatically and continues until

all points for the average have been obtained. After the point is

averaged, it is stored in the waypoint file.
In both cases, after the averaged waypoint is stored, the Mark

Point screen closes. The new waypoint is included in the list of

waypoints on the left side of the Waypoint screen.

Export

The Export button starts the average function, and then exports

the averaged point to your Waypoint Data Path (See Configuration/

File to set up Waypoint Data Path).
Note: When the waypoints file reaches the 256 point limit, the Export

button can still be used to export data to another application, but a new

waypoint file must be created if additional points are stored.

Cancel

Tapping the Cancel button closes the Mark Point screen.