beautypg.com

Juniper Systems LandMark Mobile User Manual

Page 35

background image

LandMark Mobile User’s Manual  5

The Configuration screen contains seven tabs, GPS, File, Data,

Units, Mask, HotKeys, and Keyboard. This section covers the

options available in each one of these tabs.
To use the Configuration screen via the keyboard, use the tab keys

(forward or back tab), or the circular navigation key. To exit the

Configuration screen, tap OK in the top right hand corner of the

screen, which will also automatically save all your configuration

changes.
Note: Tapping on the OK in the upper right hand corner saves any

configuration changes you have made.

GPS Tab

The GPS tab is used to configure the COM port you are using to

attach the GPS receiver. Any changes to the communication port

become effective immediately, a program restart is not needed.