Juniper Systems LandMark Mobile - Manual (Page 10)

10 LandMark Mobile User’s Manual
First Time LandMark Mobile Installation
To install LandMark Mobile on your Field PC, it must be installed
to your desktop PC first. Once installed on your desktop PC,
LandMark Mobile is installed on your Field PC through an
ActiveSync connection between your handheld and your PC.
Note: In this manual, when ActiveSync connection is discussed it is
synonymous with Windows Mobile Device Center (WMDC) on a
Windows Vista™ Desktop.
Step 1: Installing LandMark Mobile on the desktop PC
To install LandMark Mobile on your Field PC, complete the
following steps:
1. Establish an ActiveSync or WMDC connection between your
desktop PC and your Field PC.
2. Place the LandMark Mobile CD-ROM into the CD drive of
your desktop PC. If it does not auto start, navigate to your
CD drive and tap on LandMark Mobile_install.exe to begin
installation. The installation wizard automatically starts up
with the LandMark Mobile Setup: License Agreement screen.
3. Click on the I Agree button to continue with the installation
process. Note: You must agree with the License Agreement to
use LandMark Mobile.
4. Select the Installation Options you want from the LandMark
Mobile Setup: Installation Options screen. The installation
options are described below.
The LandMark Mobile option is selected by default and cannot be
unselected. This installs the LandMark Mobile application and
the User’s Manual on your desktop PC.