Juniper Systems LandMark Mobile - Manual (Page 38)

3 LandMark Mobile User’s Manual
using the Mark Point screen (explained in detail later in this
chapter), a file named dtex.txt is overwritten or created in the
location you have specified in the File tab.
When the Export button is tapped in the Mark Point screen, your
last active application opens automatically. Press Enter or type a
command to read the modified dtex.txt file and obtain the GPS
data. See the Mark Key section later in this chapter for further
details on Mark Point screen.
Ini File Write Protected
The Ini File Write Protected box indicates whether a general field
user can change configuration settings when checked. This
option ensures that all data being collected are always the same
format, regardless of which user is operating LandMark Mobile.
To check the box and lock the configured settings, see the
Programming chapter.
Data Tab
Once the data are calculated in the specified format, Data tab
options determine how they are sent to their final locations,
through Data Exchange, Memory Exchange, or Keyboard Wedge.
Mark Point Options
Point Averaging, Number of Points, and Data Exchange File all apply to
the Mark Point screen. The Mark Point screen pops up when the Mark
Hot Key is pressed. (See HotKeys tab to set up the Mark Hot Key.)
Point Averaging
Checking Point Averaging activates the point averaging function; if
this option is left unchecked, no averaging occurs when marking