Juniper Systems LandMark Mobile - Manual (Page 34)

3 LandMark Mobile User’s Manual
The From -> To section is updated even without receiving GPS
signal. Once the From and To waypoints are selected, the values
in the From -> To section do not change.
Distance
The Distance box displays the distance in current units (metric or
standard) from the From location to the To location. The distance
converts to miles or km when the distance reads high enough
that it applies.
Azimuth
The Azimuth box displays the compass heading in degrees from
the From location to the To location.
Quality
See GPS quality status explanations located earlier in this section.
Heading Setting
The heading setting is located below the Quality status line. It
displays which heading the compass is set to. Options include
True North, Auto Magnetic, Manual Magnetic, or the World
Magnetic Model Epoch 2000 (WMM-2000 or WMM 2K).
For more information about the heading settings and the options
available to you, go to the Heading title in the Configuration Screen
section of this chapter.
Configuration Screen (Config)
The Configuration screen allows you to customize LandMark
Mobile according to operational preferences.
To display the Configuration screen, complete one of the following
steps:
Tap on the Configuration icon located in the task bar.
Select | Menu | Screens | Config

