Juniper Systems LandMark Mobile - Manual (Page 16)

1 LandMark Mobile User’s Manual
LandMark Mobile DEMO Mode
LandMark Mobile offers a Demo Mode allowing you the
opportunity to evaluate LandMark Mobile prior to purchase.
Click on the DEMO button to activate Demo mode.
Demo mode allows the user full use of LandMark Mobile for
multiple 20 minute periods. Once the 20 minutes expires, a pop-
up window appears indicating the 20 minute evaluation session
is over.
Tapping on the OK button or the X in the top right corner of this
window saves the LandMark Mobile files you are working on and
closes down the LandMark Mobile application.
Additional LandMark Mobile Installations
Once LandMark Mobile has been installed on your desktop PC
it does not need to be reinstalled each time you want to install
LandMark Mobile on additional Field PC’s. You will need a
separate Serial Number and Registration Key for each additional
Field PC installation.
To install LandMark Mobile onto a Field PC from a desktop PC
that already has LandMark Mobile installed on it, complete the
following steps:
1. Establish an ActiveSync connection between the Field PC and
desktop PC.