beautypg.com

Juniper Systems LandMark Mobile User Manual

Page 49

background image

LandMark Mobile User’s Manual  49

When New is tapped, a pop-up screen appears.

Change the Waypoint ID and fill in latitude, longitude, and

elevation. The units format depends on what is selected in the

configurations screen. (See Configuration instruction to change

Units format.)

Waypoint #

Waypoint # is the number assigned by LandMark Mobile. All

points in a waypoint file are numbered consecutively.

Waypoint ID

Waypoint ID is the point name that you give to a point.

Latitude

Latitude shows the waypoint latitude.

Longitude

Longitude shows the waypoint longitude.

Elevation

Elevation shows the waypoint elevation.
When you are finished entering all fields, tap on the OK button to

go back to the Waypoint screen. All of your point information is

saved into the waypoint file when you tap on OK.