Juniper Systems LandMark Mobile - Manual (Page 37)

LandMark Mobile User’s Manual
Parity, Data Bits, Stop Bits
As with Baud rate, the communication parameters for Parity, Data
Bits, and Stop Bits must be those used by the receiver. Parity, Data
Bits, and Stop Bits are specified by the GPS receiver’s manual.
Please see the user’s manual for these values and set them
appropriately.
DTR
The DTR (Data Terminal Ready) option provides a 5V power
supply on COM1 (only). It is used when an external GPS receiver
requires power from the Field PC.
RTS
The RTS (Request to Send) option is a standard when using serial
port communication. You should only select this option when
requested by the GPS receiver.
File Tab
The File tab defines where you want to store your LandMark
Mobile waypoint files on the Field Computer.
Waypoint Data Path
LandMark Mobile automatically defaults to \My Documents\ for
Waypoint Data Path. Tap on Browse to set a different location for
the waypoint file. This feature makes saved waypoint files easy to
access.
Data Exchange
Data Exchange gives you the option of easily sharing GPS data
between two applications. Every time a new point is created