Juniper Systems LandMark Mobile - Manual (Page 39)

LandMark Mobile User’s Manual 9
a waypoint. Point averaging averages the positions collected from
the specified number of averaging points to calculate the point
average value.
Each new position is included in the running average until the
specified number of positions to calculate the overall average are
accumulated. Point Averaging is used when the Mark Point screen
is open.
Note: Masked position information is not included in the average. See
the Mask Tab section in this chapter for more information.
Number of Points
Enter in a Number of Points after you have checked the Point
Averaging box. This user-specified number of GPS positions is
used when calculating averaged points.
Data Exchange File
Check the Data Exchange File option to use the data exchange path
when exporting an averaged point. See the Data Exchange section
in this chapter.
Export button saves to waypt file
Check Export button saves to waypt file to both save data as a
waypoint, and to export data concurrently when the Export
button is tapped.
Memory Exchange
Check the Memory Exchange option to share location data with
another application. See the Programming chapter for more
information.
Keyboard Wedge
Check the Keyboard Wedge option to activate the wedge Hot Key.
Keyboard Wedge allows the latitude, longitude, and elevation to
be sent directly into another application when the Hot Key is
pressed. This option is useful when you want a simple GPS point
logged in another application.
When Keyboard Wedge and Date Exchange boxes are both
checked, use the Mark hot key to send data to a data exchange file
and also wedge data into other applications.