Juniper Systems LandMark Mobile - Manual (Page 59)

LandMark Mobile User’s Manual 59
the key-value pair is not functioning correctly, LandMark Mobile
cannot read the application path value. This problem could
happen because of one of the following reasons:
1. A clean boot was executed and erased the key-value.
2. The registry has been corrupted.
Registry errors may be fixed by doing a reset. If the reset does not
work, reinstall LandMark Mobile.
LandMark Mobile General Error Messages
The following are the error or warning messages and the
suggested fix for those messages that may occur during general
LandMark Mobile use.
Error message:
Error Reading Waypoint file.
A waypoint file is saved as a text file (.txt), so a user can open it in
Word or Notepad, etc. and modify it. To do this, the data must be
properly formatted. This error message pops up for the following
reason:
1. The waypoint file is not formatted properly.
To fix this problem use the Convert Waypoint File menu option in
Menu/Tools/Convert Waypoint. It formats your data to the proper
usable format.
Error message:
Error Creating Waypoint file.
This error message is used to protect any files you may have
saved. It ensures that your files are not overwritten. This message
appears for one of the following reasons:
1. You are trying to duplicate a file name.
2. The path specified to save to or to open from is not valid.
To fix this problem, rename a file, or be sure that the path you
have specified exists.
Error message:
Directory does not exit. Using “\My Documents\.
When LandMark Mobile is closed, the current waypoint file is