Juniper Systems LandMark Mobile - Manual (Page 32)

3 LandMark Mobile User’s Manual
The Navigation screen displays the following features, discussed
later in this section:
From
To
Compass
Here -> TO
FROM -> TO
Quality
Mag Dec
From
The From box displays the waypoint that is the starting point you
intend to begin traveling from. The option Here is the current
position.
To
The To box displays the waypoint that is the ending point. This
point is your destination point.
Waypoint File
Waypoint files are files consisting of points that have been
saved and labeled. Before the navigation function can be used, a
waypoint file must be identified and opened.
When waypoints within the file are selected in the From and To
boxes, the Nav screen fields update the following:
Compass
Here -> To
From -> To
Quality - Always updated - Current GPS status
Mag Dec - Set value based on Configuration Settings
Note: If the GPS receiver is not active, only the From -> To box is updated.
LandMark Mobile allows an unlimited number of waypoint files.
You can log 256 waypoints in each waypoint file.
To open a waypoint file, complete one of the following steps:
1. Tap on File/New to create a new waypoint file.
2. Tap on File/Open to open an existing file.
A waypoint file is now activated.











