FXpansion BFD Premium Acoustic Drum Module - Manual (Page 47)

41
7:6 Hit Options presets
There are two types of Hit Options preset
fi les: Key assignment fi les and MIDI CC
assignment fi les.
Key assignment preset fi le (.bft)
This type of fi le stores all settings on Page 1,
Page 2 and Advanced tabs of the Hit Options
panel, with the exception of the Hihat pedal
position MIDI controller. This is stored in the MIDI CC assignment fi le.
MIDI CC assignment preset fi le (.bfc)
This type of fi le stores all settings in the MIDI CCs tab of the Hit Options panel. It is the
only fi le which stores the Hihat pedal position MIDI CC, which is also shown in the
Page 1 tab.
Use the Save and Load buttons on each tab in order to store and recall presets. The fi les
are stored in the BFD/Keymaps folder.
The Hit trim and Unload settings on Pages 1 & 2 of the Hit Options panel are not saved
with Hit Options presets. These settings are only saved in BFD Programs.
Saving defaults
If you have custom Hit Options settings which you would like to take effect whenever
you launch BFD, save them as presets named default.bft and default.bfc. You will
have to over-write the current defaults. You can always recall the factory default settings
by loading factorydefault.bft and factorydefault.bfc, and re-save them as defaults if
necessary.
Reset buttons
Clicking the Reset buttons in each tab, next to the Load and Save buttons, reverts back to
the settings contained within the default preset fi le.
[SHIFT]-clicking the Reset buttons in each tab resets to the factory defaults.
The Reset button on the MIDI CCs tab does not affect settings on Page 1, Page 2 and
Advanced tabs, and vice versa.
Chapter 7: Controlling BFD
Reset Save
preset
Load
Preset