FXpansion BFD Premium Acoustic Drum Module - Manual (Page 43)

37
MIDI Learn
In the Advanced tab, MIDI Learn functions in a different way to Pages 1 & 2. When the
Learn button is activated, any incoming MIDI note will cause the display to jump straight
to the corresponding note in the list. Click the button again to deactivate MIDI Learn
mode.
MIDI Log
When the Log button is activated, any MIDI input received by BFD is displayed in the
event monitor display.
Clicking the Reset Log button clears the display.
Advanced key assignment editor
Each line in the note assignment list corresponds to a MIDI note, numbered from 0 (C-2,
at the bottom of the list) to 127 (G8, at the top), with columns for specifying the Kit-Piece
and Hit type, as well as a number of other parameters.
Any assignments which have been made are highlighted in blue.
If Respond to Groove notes is enabled in the Play Options panel (see section 9:2), then
the notes used for the Grooves, and for the Auto-repeat button functions, are shown and
highlighted in green, with GRV shown in the Kit-Piece column.
With the exception of the Kit-Piece and Hit Type drop-down menus, values are changed
by clicking and dragging them.
Kit-Piece
Clicking on this column for any note will bring up a drop-down
menu with which to select the Kit-Piece slot to use with the note.
Hit Type
The Hit Type column is used to select
which Hit in the Kit-Piece is assigned
to the note, via a drop-down menu. The
contents of the menu change dynamically according to which Kit-
Piece slot has been selected. You must specify a Kit-Piece before
you can access the Hit Type drop-down menu.
Chapter 7: Controlling BFD
Scrollbar
MIDI Log event monitor display MIDI Learn
Reset Log
MIDI Log