Futaba 3PKS - Manual (Page 99)

99
F
u
nction
System Functions "SYSTM"
1
(Setting the liquid crystal backlighting mode)
Select the setting item "LHT-MODE" by (JOG) button up or down
operation, and select the mode by pressing the (+) or (-) button.
"KEY-ON" :Fixed time backlighting ON after button operated.
"ALWAYS" :Backlighting always ON
"OFF" :Backlighting OFF
(Setting liquid crystal backlighting time)
Select the setting item "LHT-TIME" by (JOG) button up or down
operation, and use the (+) and (-) buttons to set the ON time.
- When "KEY-ON" is set at the preceding item, this ON time becomes effective.
(Adjusting the liquid crystal contrast)
Select the setting item "CONTRAST" by (JOG) button up or
down operation, and use the (+) and (-) buttons to adjust the
screen contrast.
- Adjust to an easy-to-see contrast.
(Adjusting the buzzer tone)
Select the setting item "BUZ-TONE" by (JOG) button up or down
operation, and use the (+) and (-) buttons to adjust the tone.
- Decide by referring to the tone at adjustment.
(Changing the LED display color)
Select the setting item "LED-MODE" by (JOG) button up or
down operation, and use the (+) and (-) buttons to select the
color.
- Select your favorite color while viewing the LED color.
(Changing the initial screen display mode)
Select the setting item "DISP-SEL" by (JOG) button up or down
operation, and use the (+) and (-) buttons to select the display
mode.
"Futaba" :"Futaba" logo is displayed on the initial screen.
"TIMER" :Timer screen is displayed on the initial screen.
"SRV-VIEW" :Servo operation graph is displayed on the initial screen.
"USR-NAME" :User name
"TRM/DIAL"
:The trim and dial information is enlarged and displayed on
the initial screen.
(Changing the power off forgotten alarm setting)
Select the setting item "OPE-TIME" by (JOG) button up or down
operation, and use the (+) and (-) buttons to select the The pow-
er off forgotten alarm mode.
"10m" :If an operation is not performed within 10 minutes while the
power is on, an audible alarm sounds.
"OFF" :Power off forgotten alarm setting OFF
2
When ending setting, return to the initial screen by pressing the
(END) button twice (for direct selection, press the (END) button
once).
System function setup
The power off forgotten alarm
(OPE-TIME)
10m, OFF
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Backlight mode (LHT-MODE)
KEY-ON, ALWAYS, OFF
Backlighting time (LHT-TIME)
1~30
Initial value: 10
Contrast (CONTRAST)
-10~0~+10
Initial value: 0
Buzzer tone (BUZ-TONE)
OFF, 1~75~100
Initial value: 75
LED color (LED-MODE)
(OFF), BLUE, RED, PURPLE,
GREEN, SKY BULUE, OR-
ANGE, PINK
After reset :ORANGE
Initialization :PURPLE
Initial screen mode (DISP-MODE)
Futaba, TIMER,SRV-VIEW,
USR-NAME, TRM/DIAL