Futaba 3PKS - Manual (Page 93)

93
F
u
nction
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Model Copy "M-COP”
(Preparation)
Select the setting item "MODE" by (JOG) button up or down op-
eration and select "SINGLE" or "GROUP" by pressing the (+) or (-)
button.
1
(Copy source model No. selection)
Select the setting item "MST" by (JOG) button up or down op-
eration. Press the (+) or (-) button and select the model #.
2
(Copy destination model No. selection)
Select the setting item "SLV" by (JOG) button up or down opera-
tion. Press the (+) or (-) button and select the model #.
- For the model currently in use (including group), "NOT POSSIBLE" blinks at
the bottom of the screen to alert the operator that the model cannot be copied.
3
(Copy execution)
Select the setting item "EXEC" by (JOG) button up or down
operation. Press the (+) and (-) buttons simultaneously for 1
second. When "COMPLETE!" blinks at the bottom of the screen, copying is
complete.
4
When ending setting, return to the initial screen by pressing the (END)
button twice (for direct selection, press the (END) button once).
Model copying
(Screen with group mode selected)
Model Copy "M-COP"
This function calls the contents of one model memory to another model memory.
Single mode (SINGLE) and group mode (GROUP)
Single mode copies data to another model in model units.
Group mode makes the data of model memories M1 to M10 and M11 to M20, and DataPac model memories E21 to
E30 individual groups and copies the data from group to group. For example, this function is convenient when copying
the data of T3PKS transmitter model memories M1 to M10 to DataPac model memories E21 to E30 in a batch.
Current model # and model name
Copy destination model # and
model name
Copy execution button
- (+) and (-) buttons pressed
simultaneously for about 1 sec-
ond.
Model No.
M1~M20 :Model memory in the
Transmitter
E21~E30 :Model memory in the
CAMPac-16K
Setup item selection
- Select by (JOG) button up or
down operation.
Model number selection
- Use the (+) and (-) buttons to
make adjustments.