Futaba 3PKS - Manual (Page 21)

ｉ Warning
21
B
e
fo
re
Using
Data interchangeability with other models
Data is not interchangeable with T3PK, T3VCS, and other transmitters other than the
T3PKS.
Set data backup
The set data of each function (transmitter body and the CAMPac-16K) of the T3PKS
transmitter is stored in a memory element that does not require a backup battery. There-
fore, the T3PKS transmitter can be used without paying attention to the backup battery
life.
Display switch
If the display switch is turned on without turning on the power switch, transmitter side
data setup is possible without emitting radio waves.
Display switch
ON
OFF
"DISP" is displayd
ｇ Never turn on the power switch while this function is in use.
If the power switch is turned on, radio waves will be emitted and interfere with vehicles (boats) operating on the
same band (frequency) and is very dangerous.
Power off forgotten alarm
When the steering wheel, throttle trigger, push switch, or edit button is not operated for
10 minutes during T3PKS initialization, an alarm sounds and "NOT OPRATED FOR
LONG TIME" is displayed on the LCD screen.
When the steering wheel, throttle trigger, push switch, or edit
button is operated, the alarm is reset. If the system is not to be
used, turn off the power.
The function can be deactivated at the system menu (p.98).