Futaba 3PKS - Manual (Page 59)

With "THSPD": Quick start without skidding
Without "THSPD": Slow start due to skidding
1 SPEED
A delay is set over the entire
throttle range.
2 SPEED
A delay can be set in 2 ranges
with TGP1 as the boundary.
3 SPEED
A delay can be set in 3 ranges with
TGP1 and TGP2 as the boundaries.
TGP1
high
neutral
high
neutral
high
neutral
TGP2 TGP1
ALL
LOW
HIGH
LOW
HIGH
MID
59
F
u
nction
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
-Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if
the trottle trigger is operated more than necessary. This delay function is not performed
when the trottle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
Operation
Throttle Speed "THSPD"
While the throttle speed function is ON, the LED blinks, (If LED color is not selected
as off).
also appears on the initial screen and menu screen.
Operation display
Mode selection
One speed, 2 speed, or 3
speed can be selected at the
“MODE” item. The setting
item (screen) depends on the
mode. The figure at the left is
the 3 speed setup screen.
The LED blinks while the throttle
speed function is on.
Throttle Speed "THSPD" (Throttle system)
Sudden trottle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.