Futaba 3PKS User Manual
Page 115

115
Refer
e
nce
Power off forgotten warning
If the T3PKS is not operated for 10 minutes, an audible alarm is sounded and "WARN-
ING" is displayed on the screen. The audible alarm stops when the steering wheel, throt-
tle trigger, and any dial, switch, or edit button is operated. If you are not going to use the
transmitter, turn the power off. (Setting can be reset at the system menu on page 98.)
LCD screen:
alarm:
Tone sounds (7 times) and stops (re-
peated)
Audible
Idle-Up or Preset Warning
When the power switch is turned on while the idle-up or preset (engine cut) function switch
is on, an audible alarm will sound and "MIX WARNING" will be displayed on the LCD.
When the idle-up function switch is turned off, the alarm will stop.
LCD screen:
Audible alarm:
Tone sounds (7 times) and stops (re-
peated)
Memory Error
If the data in the transmitter is not transferred normally when the power is turned on, an
audible alarm will sound and "ACCESS ERROR" will be displayed on the LCD.
- To stop the alarm, turn off the power.
- Turn the power back on. If the alarm is not generated again, there is no problem.
LCD screen:
Audible alarm:
Tone sounds (7 times) and stops (re-
peated)
Data Pac Error
If data transfer with the Data Pac was not performed normally, an audible alarm will
sound and "ACCESS ERROR" will be displayed on the LCD screen.
- To stop the alarm, turn off the power.
- Turn the power back on. If the alarm is not generated, there is no problem.
LCD screen:
Audible alarm:
Tone sounds (7 times) and stops (re-
peated)