Model reset "m-res, Fu nction – Futaba 3PKS User Manual

Page 94

nction

(Opening Screen)

MENU 1

Press t

button

Calling the setup screen

(Opening Screen)

MENU 2

DIRECT SEL

*Calling from menu screen

Press the button set
at this function.

MENU1/2 selection
by

button

Menu screen call
by

button

Select the function
by

button

Press t

button

* When the direct call button is set,
the setup screen is also called by the
following method:

•Select the setting item by

button

* b l i n k s a t t h e c u r r e n t

setup item.

Model Reset "M-RES"

Current model #

Model Reset "M-RES"

Select the setting item "TYPE" by (JOG) button up or down

operation and press the (+) or (-) button and select the reset

type from among "DATA RESET", "MENU RESET", and "ALL

RESET".

(Reset execution)

Select the setting item "EXEC" by (JOG) button up or down

operation.

Press the (+) and (-) buttons simultaneously for 1 second.

When "COMPLETE!" blinks at the bottom of the screen,

memory resetting is complete.

When ending setting, return to the initial screen by pressing the (END)

button twice (for direct selection, press the (END) button once).

Model Reset

Type (TYPE)

DATA RESET
MENU RESET
ALL RESET

This function resets the contents of the currently called model memory.

The reset method can be selected from among the 3 types described below. These resets
do not initialize the adjuster function (ADJST), system function (SYSTM), lap reset
(LAP-L), user name (NAME), and modulation (HRS/PCM/PPM) selection function (P-
MOD).

DATA RESET

Initializes only the function setting data. The menu function and direct selection function are not initialized.

MENU RESET

Initializes the menu function and direct selection function. Other settings are not initialized.

ALL RESET

Initializes the menu function, direct selection function, and the setting data of each function.

Reset execution button
- (+) and (-) buttons pressed

simultaneously for about 1 sec-
ond.

Setup item selection
- Select by (JOG) button up or

down operation.

Reset type selection
- Use the (+) and (-) buttons to

make adjustments.