Digilent 410-087P-KIT - Manual (Page 95)

Spartan-3E Starter Kit Board User Guide www.xilinx.com 95
UG230 (v1.0) March 9, 2006
Configuring from SPI Flash R
To generate the actual PROM file, click Operations Æ Generate File as shown in
Figure 12-13 .
As shown in Figure 12-14 , the iMPACT software indicates that the PROM file was
successfully created. The PROM Formatter creates an output file based on the settings
shown in
Figure 12-8 . In this example, the output file is called MySPIFlash.mcs.
Figure 12-12: PROM Formatting Completed
Figure 12-13: Click Operations Æ Generate File to Create the Formatted PROM File
Figure 12-14: PROM File Formatter Succeeded
UG230_c15_11_030206
UG230_c15_12_030206
UG230_c15_13_030206