Digilent 410-087P-KIT - Manual (Page 146)

146 www.xilinx.com Spartan-3E Start Kit Board User Guide
UG230 (v1.0) March 9, 2006
Appendix A: Schematics R
Power Supply Decoupling
IC10PWR represents the various voltage supply inputs to the FPGA and shows the power
decoupling network.
Jumper JP9 defines the voltage applied to VCCO on I/O Bank 0. The default setting is 3.3V.
See
“Voltage Control,” page 22 and “Voltage Supplies to the Connector,” page 114 for
additional details.