Before reading this manual – Toshiba Programmable Controller PROSEC T3 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before reading this manual

^ This is the warning mark for dangerous locations. It is attached

to the equipment in positions where there is a risk of electric

shock and in positions where there is a risk of damage to the
equipment through wrong wiring.

Take the following precautions where there is a A mark>

(1) Hazardous voltage can shock or cause severe injury if you

touch the power input terminals while power on. Do not

touch the power input terminals.

(2) For safety, always switch off power when wiring and during

maintenance and inspections.

(3) Wire the power input terminals correctly and do not apply

voltages in excess of the specified voltage limits, since this
will cause the equipment damege.

PROSEC T3