AERCO Modulex E8 Controller (and BCM) For Modulex EXT Boilers - Manual (Page 99)

E8 Controller and BCM for Modulex EXT
Installation, Operation & Maintenance Manual
CHAPTER 10: E8, BCM, AND BMM FAULT CODES
OMM-0093_0A AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 99 of 108
GF-136-C Ph.: 800-526-0288 PRI: 06/24/2013
CHAPTER 10: E8, BCM, AND BMM FAULT CODES
This section provides tables for identifying faults (with fault troubleshooting tips) and describes
the procedures required to clear a displayed fault code after the cause of the fault has been
corrected. Fault codes are displayed in the upper right area of the LCD display on the E8
Controller as shown in Figure 10-1.
NOTE
See the Trouble-Shooting Guide in Chapter 6 of the Modulex EXT
manual (GF-136) for more detailed Fault Code descriptions and
trouble-shooting procedures.
Figure 10-1: E8 Controller Fault Code Location
Fault Codes are
Displayed Here
(i.e. E 70)