AERCO Modulex E8 Controller (and BCM) For Modulex EXT Boilers - Manual (Page 30)

E8 Controller and BCM for Modulex EXT
Installation, Operation & Maintenance Manual
CHAPTER 5: E8 CONTROLLER MENUS AND SUB-MENUS
Page 30 of 108 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0093_0A
PRI: 06/24/2013 Phone: 800-526-0288 GF-136-C
Table 5-2: USER Menu Listing
FUNCTION DESCRIPTION ENTRY RANGE DEFAULT
INSTALLATION Sub-Menu
LANGUAGE Selects display language.
12 languages are
available.
ENGLISH
CONTRAST Adjusts display contrast -20 to 20 00
DISPLAY
SEL
Sets the day of the week or the sensor
temperature (°F) to appear in the display when
the swing-down panel is closed.
Day: SUN – SAT
T-OUTSIDE: Outside Temperature
FLOW TEMP (1/2): Flow Temp. For Heating
Circuit 1 or 2 supply
water temperature. (Only
if sensor is installed)
T-DHW: Domestic Hot Water
Temperature.
T-BOILER; Boiler Outlet Temperature.
T-ROOM (1 / 2): Room Temp, Heating
Circuit 1 or 2 (ONLY if
Remote Control is
connected).
See
DESCRIPTION
Column
- - - -
RETURN
Press Program Key to exit INSTALLATION
Sub-Menu.
HOT WATER Sub-Menu
1X DHW
Not Applicable
T-DHW 1 Hot Water set point 50°F - 158°F 140°F
T-DHW 2 Not Applicable
T-DHW 3 Not Applicable
BOB-VALUE Not Applicable
CIRCL-P-
DHW
Not Applicable
RETURN
Press Program Key exit HOT WATER Sub-
Menu.
USER USER