KEYENCE XG VisionTerminal - Manual (Page 45)

Settings Menu
4-13
XG
Vi
si
on
Te
rmi
na
l
Ap
pl
ic
ati
o
n
Men
u
This command changes the XG VisionTerminal operating
environment settings.
1
From the [Settings] menu, click [Option].
The [Option] menu appears.
2
Change the settings as required.
Selecting [Automatic connection on startup]
When this option is checked, the XG VisionTerminal
will automatically connect to all registered XG Series
connections when it is started.
Selecting [Start logging on startup]
When this option is checked, the XG VisionTerminal
will automatically start logging from all registered XG
Series connections when it is started.
Reference
This option can only be checked if the [Turn on automatic
connection] option is checked.
Downloaded File Basepath
This option defines the base path used for storing
captured screens (Page 4-7) and acquired files (Page
4-12). Click [Reference] to specify the destination.
Note
The [Reference] button is disabled when logging is in
process.
Automatically adjust remote desktop window size
If this option is checked, the XG Series controller
screen in the remote desktop will automatically adjust
according to the size of the window.
Handheld controller button assignments
The commands assigned to the buttons in the
handheld controller view are configurable. For more
details, see "Changing the handheld controller button
assignments" (Page 4-13).
3
After completing the changes, click [OK].
Changing the handheld controller button
assignments
When using a keyboard or a joypad to operate the buttons
in the handheld controller view, each key can be assigned
a desired button.
1
From the [Settings] menu, click [Option].
The [Option] menu appears.
2
Under Keyboard Input, click [Key Assign].
The [Key Assign] menu appears.
3
Change the key assignments as required.
To change the assignments for keyboard operation
• Change the column labeled [Keyboard].
• The keys labeled [NUM] indicate the numeric keypad.
To change the assignments for joypad operation
• Change the column labeled [Joypad].
• Specify the button number on the joypad for each button
on the console.
4
After completing the changes, click [OK].
5
Click [OK] to exit the [Option] menu.
Changing the XG VisionTerminal
Global Settings (Options)