KEYENCE XG VisionTerminal - Manual (Page 31)

Logging Data from the XG Series
3-7
Ty
pical Uses
This procedure connects the XG Series controllers that are
registered as connections in the XG VisionTerminal.
Click [Connect All] from the [Operation] menu.
When the connection is completed, icons for each
connection in the system view will change from
to .
Reference
You can also connect to the controllers by clicking on the
toolbar.
Note
• If any of the connections fail, a confirmation screen will appear.
• When multiple connections are registered, it is not possible
select individual controllers to connect to, all of them will be
connected.
This procedure starts logging data from the XG Series
connected and enabled as a logging target.
From the [Operation] menu, click [Start Logging].
Logging starts and the logging icon in the system view
changes from to .
Clicking on the [+] to the left of the logging icon
expands the logging targets.
Log file destination
Log files are output to [Documents\KEYENCE\XG
VisionTerminal\(IP address or [USB]] (by default) for the
user currently logged in.
Example:
If the destination folder in the data output step
programmed in XG VisionEditor is set to [SD2:\xg\result\],
the default log destination will noted as follows.
• For Windows versions other than Vista/7:
C:\Documents and Settings\name of logged in user\My
Documents\KEYENCE\XG VisionTerminal\(IP address or
[USB])\SD2\xg\result
• For Windows Vista/7:
C:\Users\name of logged in user\Documents\
KEYENCE\XG VisionTerminal\(IP address or
[USB])\SD2\xg\result
Reference
• The logging destination can be changed in the [Downloaded
File Basepath] field. See "Changing the XG VisionTerminal
Global Settings (Options)" (Page 4-13) for more details.
• The log file destination folder can be opened directly by
clicking [Open destination] in the properties menu displayed
by right-clicking on each logging icon, or by double-clicking
the icon. When archiving is in progress, this shortcut always
opens the following location.
- For Windows versions other than Vista/7:
C:\Documents and Settings\name of logged in user\My
Documents\KEYENCE\XG VisionTerminal\(IP address or
[USB]).
- For Windows Vista/7:
C:\Users\name of logged in user\Documents\KEYENCE\XG
VisionTerminal\(IP address or [USB]).
2. Connecting to the Controller
3. Start Logging