KEYENCE XG VisionTerminal - Manual (Page 36)

View Menu
4-4
View Menu
This section explains the commands in the [View] menu.
The connections view is displayed when a check mark
appears next to this command.
With the check mark visible, open the [View] menu
and click [Connections].
This hides the connections view.
Reference
By default, a check mark appears next to this command and the
connections view is displayed.
To show the connection view again
From the [View] menu, click [Connections] again to restore
the check mark.
This command shows the handheld controller view which
is used to operate the XG Series controller currently
monitored in the remote desktop.
In addition to sending remote console keystrokes by
clicking buttons visualized in the handheld controller view,
users can also use the keyboard or joypad connected to
the PC.
From the [View] menu, click [Handheld Controller].
The [Handheld Controller] appears.
Closing the handheld controller view
Click the close button on the handheld controller view.
Show/Hide the Connections view
(Connections)
Operating the Remote Desktop
(Show Handheld Controller View)