Welch Allyn Duet CO2 Module - User Manual - Manual (Page 63)

Duet CO
2
Module OEM Implementation Manual
Welch Allyn OEM Technologies Confidential Page 63
Low Dead Space Single-Use Airway Adapter Specifications
PHYSICAL SPECIFICATIONS
Overall Dimensions 2.04"L.x 0.88"W x 1.14"H
(5.2cm L x 2.24cm W x 2.9cm H)
Contributory Dead Space <1cc (1ml)
Fittings: Male O.D. 15mm, per ISO 5356-1 and ASTM F1054
Female I.D. 15mm, per ISO 5356-1 and ASTM F1054
Resistance: See Figure B
Respiration Rate 0 to 150 bpm
Nominal Weight: 4.8g
Material: Polycarbonate resin and sapphire
Pressure Leak Tested at: 15psi
Environmental Conditions
Ambient Shipping/Storage:
Temperature
Relative Humidity
Barometric Pressure -4° to 140° F (-20° to 60° C)
15-95% RH, non-condensing
795mmHg to 375mmHg (-1300ft to 45000ft)
Ambient Operating Conditions:
Temperature
Relative Humidity
Barometric Pressure 50° to 140° F (10° to 60° C)
15%-95%RH, non-condensing
795mmHg to 375mmHg (-1300ft to 45000ft)
Note: This airway adapter is designed for a maximum flow of 30 l/min. This airway
adapter is not designed for reuse on another patient.
Pressure Drop
(cm H
2
0)
0
2
4
6
8
10
0 5 10 15 20 25 30
Flow (Liters/min)
Figure B
Average Pressure Drop Across the Low Dead Space Airway Adapter