Vinten Radamec Control (VRC) - Manual (Page 75)

VRC system user guide
74
Shot preferences
Fig. 39 Configuration screen - Shot Preferences
Option ON OFF
Take Camera When you select a shot on
the touchscreen, the
Camera Preview selection
on the joystick control panel
automatically follows and
the joysticks will control the
camera for the selected
shot. The shot selection on the
touchscreen and the
Camera Preview selection
are decoupled. So, let’s say
that camera #1 is on air and
being trimmed with the
joysticks. You can select the
next shot on camera #3 and
Fade or Cut to it while
continuing to trim camera #1
with the joysticks.
Single Selection Allows you to select a shot
on one camera at a time
and then Cut or Fade to that
shot. Selecting a second
shot on a different camera
automatically deselects the
first shot. Allows you to select shots on
multiple cameras and then
Cut or Fade to all of the
shots at the same time.
Delete Warning Every time you delete or
replace a shot a warning
dialog appears and requires
you to confirm the deletion
or replacement. Shots will be deleted or
replaced immediately. This
mode should be used with
caution, because there is no
undo feature to restore a
deleted shot.
Default time Allows you to enter a default
time that will be used when
you store shots if the
Require Shot Time function
is Off.
Shot Preferences
Single
Selection
Default
Time: 9.50
Delete
Warning
Allow
Deselect
Take
Camera