Vinten Radamec Control (VRC) - Manual (Page 41)

VRC System User Guide
40
For Fusion pedestals, since the TARGET or HOME shot is located behind the target
it does not offer the same protection. You may want to create an additional shot called
OVER TARGET to protect the target from damage between shows.
The workspace should now have one target or home shot for each camera unit
mounted on a pedestal. The show is now ready to have additional shots added.
Adding shots to a show
To add a shot to a show:
Make sure that the required show with its target (home) shots is loaded.
1. Select Menu > Configuration and make sure that Require Shot Name is ON
and Require Shot Time is OFF. Touch Return.
2. Select the required camera on the touch screen or the control panel.
Fig. 18 Workspace displaying HOME shots
Fusion-5
FHR120-2
Fusion-3
FP-145-2
Fusion-7
FP-188/2
Viewing shots for Fusion-1
Fusion -1 Fusion-2
Camera 9 FP-145
Fusion-6
FP-188/3
Fusion-4
FHR120
Fusion-8
Alternate
Menu
Camera Selection and Status
Edit Stop Cut Fade Store Focus Sequence
Virtual
Stick
Page Up
Page
Down
Opts
A B C D E F
12
3
4
Primary Panel Groups
Show A HD Trial Evening TEST D Test Script Studio 1 MIDDAY Test 4
Fusion TCPI (V0.0.29.0) User: XXX Show: Test