Vinten Radamec Control (VRC) - Manual (Page 57)

VRC system user guide
56
Iris Touch the up/down arrow to adjust the iris setting. If Auto
shooting mode is on, the Iris control has no effect.
Camera gain Touch the up/down arrow to adjust the camera gain to
0dB, +6dB, +12dB, +18dB, +36dB. If Auto shooting
mode is on, the Camera gain control has no effect.
Genlock phase Touch the up/down arrow to adjust the genlock phase of
the camera output video to time the camera into your
system.
Neutral density filter Touch ND Off to operate without a neutral density filter.
Touch ND 1/6 to operate with the 1/6 neutral density filter
which is equivalent to a reduction of approx. 2.5 f-stops.
Touch ND 1/32 to operate with the 1/32 neutral density
filter which is equivalent to a reduction of 5 f-stops.
Shutter speed For 50Hz frame-rate cameras the default shutter speed
is 1/50 of a second. For 60Hz frame-rate cameras the
default shutter speed is 1/60 of a second.
Touch 1/60 or 1/50 to select the default shutter speed.
Touch 1/100 to select a shutter speed of 1/100 of a
second.
If Auto shooting mode is on, the Shutter speed control
has no effect.
Menu Button Description