Vinten Radamec Control (VRC) - Manual (Page 34)

VRC Client User Interface
33
If Single Select mode in the Configuration screen is ON, you can only select one shot
on one camera at a time. Selecting a shot on a second camera will deselect the shot
on the first camera.
Store
Touching Store will save the current position of the selected camera as a shot in the
current show for future use – see Adding shots to a show on page 41. You can
select where the shot is stored in the stored shot grid.
Focus
When you are on Shot (thumbnail coloured dark blue), selecting Focus will zoom the
lens all the way in tight. You can then:
• Use pan and tilt, if necessary, to frame the person or object that you want to
set focus on.
• Adjust the focus.
• Select one of the Focus menu options described below.
Focus Menu Option Description
Keep Camera After the focus has been adjusted, touch Keep Camera
to return the camera to the shot’s original pan, tilt and
zoom settings and keep the adjusted focus setting. The
shot stored in the show database is not updated, so the
next time you recall the shot it will have the original
focus, not the adjusted focus.
Keep Shot After the focus has been adjusted, touch Keep Shot to
return the camera to the shot’s original pan, tilt and
zoom settings, keep the adjusted focus setting and
store the adjusted focus in the show database. The next
time you recall the shot it will have the adjusted focus.
Cancel Touch Cancel to abandon the adjusted focus setting and
return the camera to the shot’s original pan, tilt, zoom
and focus settings.
Return Touch Return to return to the workspace leaving the
lens zoomed in tight and with pan, tilt and focus as you
left them.