Rice Lake TransAct 3.5 - Manual (Page 17)

Getting Started Welcome
18 Version 3.5
Getting Started
TransAct requires the following hardware and software:
• A 200+ Pentium compatible processor
• At least 64MB of RAM
• A fixed hard disk with a minimum of 3 MB of available disk space to install the program files
(additional space will be required as the database grows)
• VGA, SVGA, or greater resolution monitor set to 800 x 600 screen area
• Microsoft compatible mouse
• Microsoft Windows 95/98/NT/2000/XP (TransAct will run on ME, but is not supported)
When a complete installation of TransAct is performed, the setup program installs all of the files
necessary to run TransAct, creates the TransAct group, and all icons associated with the program.
Installing TransAct
Insert the TransAct for Windows CD-ROM .
The installation Welcome screen appears.
Figure 1. Installation Welcome Window
NOTE: If setup fails to start automatically, select Start from the desktop. Select Run
from the Start menu. In the Open field, type d:setup (replace d with the correct drive letter
for your CD-ROM drive). Click OK to start the installation program.
Click the Next button to continue.
Click the Yes button to agree to the License Agreement .