Rice Lake TransAct 3.5 - Manual (Page 123)

Axle Weighing Attended vs. Unattended
124 Version 3.5
Attended vs. Unattended
TransAct provides a number of unattended interfaces. These interfaces are defined as data terminals in
the
Data Terminal section under Admin | Preferences .
When a data terminal is defined, the Attended menu button is displayed on the Weigh form.
TransAct must be in the Weigh form in order to switch to Unattended mode.
Click the Weigh button of the menu bar. The Attended button becomes active. This designates
the system is running in attended mode.
To switch to Unattended mode, click the Attended button in the menu bar.
The button changes to the Unattended button. All manual features of TransAct are disabled until
the Unattended button is clicked and TransAct is put back into Attended mode.
Additional documentation has been created to better explain each Unattended feature. Please contact
your TransAct representative to obtain this information.