AVer NX8000 - Manual (Page 96)

89
Name Function
(5) Date Select the date on the calendar and the time from 00 to 23 to where
to start playing the recorded video file.
i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from
01 to 16 represent the camera ID. The blue colored column indicates that there is a
recorded video file on that period of time. While the red colored column indicates
on where to start playing the recorded video file.
(6) Preview Switch to Preview/Advanced mode.
(7) Playback Switch to Playback mode. This allows you to view the recorded video
file.
(8) Status bar Display the recorded date, time and play speed.
(9) Camera ID Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view
other camera.
(10) Export Export includes Snapshot, Print, Output Video Clip, and Backup
function.
Snapshot: Capture and save the screen shot either in *.jpg or
*.bmp format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.mpg, *.avi, or *.dvr
format. Follow the below steps to output a video clip:
1. Use the Playback Control buttons or drag the bar on the
playback progress bar and pause on where you want to start
the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the
playback progress bar and pause on where you want to end
the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click
Segment
button again.
3. Click Output button to save the wanted clip.
4. In the Save As dialog box, locate on where you want to save
the file, type the filename, and select the video format.
(11) Full screen View in Playback-compact mode. To return, press the right button of
the mouse or ESC on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to
toggle to only display one of the video in the multiple-screen mode or
all.
8.6 Using HandyViewer to Access DVR server
Users can use a mobile phone to access the DVR through Internet. Make sure your mobile
phone support IE browser and is connected to the internet. To access the DVR server, open IE
browser and enter http://enter server IP or domain name here/mobile. You can see the
latest screen shot. Click << >> to change the channel or camera and Refresh to reload new
screen shot.
8.7 Using PDAViewer to Access DVR Server
Users can also use a PDA to access the DVR through Internet. Make sure your PDA support
IE browser and is connected to the internet. To use this feature, you need to install the