AVer NX8000 - Manual (Page 45)

38
6. Click OK
7. Click Save. The configuration will be lost without saving.
8. To modify existing replace rules, double click it.
•
Character Replacement
Set a rule to replace a character or word in POS data. The maximum replacement is 8.
1. Select a POS device from device list
2. Click
Add in Replace section
3. Old Data: select the Type(Ascii or Hex) and enter word or character that wants to be
replaced
4. New Data: select the Type (Ascii or Hex) and enter the word or character that will replace
it in Old Data.
5. Click OK
6. Click Save . The configuration will be lost without saving.
7. To modify existing replace rules, double click it.
•
Adjust Rule Priority
User can set the priority of rule groups. Select the group and click up/down arrow button to
move the priority level. The upper position, the priority is higher.