AVer NX8000 User Manual

Page 49

camera on the LAN network. If user is not sure the camera is which model, click
Detect Model

to find the correct model of camera. If it requires user identification,

enable Authentication check box and enter User ID and Password. To enable audio,
click Enable Audio check box. If you are not sure of the Protocol or URL info, please
refer to the IP camera manual or contact your IP camera local distributor.

In Camera Setting interface, click Detail to configure Video, Senor, Relay, and Direct
Link by IE

of the IP camera.

- Video Setting

Select the video size and adjust the Frame Rate, Quality, Bright, Contrast, Hue, and
Saturation of the selected camera.

- Recording Setting

Save Original Format: Save the video that is compressed by IP camera’s

compress mode.
9

Only decode key frame for Preview: When selected the Save Original

Format

selection, user can mark Only decode key frame for Preview this

option. When previewing video, DVR system only shows key frame and
one frame per second.

Transcode by MPEG4 Encoder: Decoding the video and compress video

again by using MPEG4 encoder.