AVer NX8000 - Manual (Page 72)

65
5.9.8 To Setup PTZ Preset Point:
Beside the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting dialog
box, select the PTZ camera number then select the Enable check box. Select the position of
the PTZ camera when the alarm is activated and ended. For the PTZ camera ended point,
user also can select one preset position or Auto Path between preset position group.
5.9.9 To Setup Alarm SOP:
Beside the Alarm SOP check box, click Detail. In the
step text boxes, type the standard protocol when the alarm is activated. When the alarm is
activated, the Standard Operation Procedure dialog box will appear. Just click Next to see the
next instruction, Back to see the previous instruction, Finish to end and Abort to terminate.
5.9.10 To Setup CMS Setting
Beside the Send to CMS check box, click Detail. In the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable All to select all cameras. Then, click OK to
accept the new settings and Cancel to exit without saving.
5.9.11 To Setup POS Keyword Setting
1. Beside the Send to POS Keyword check box, click Detail.
2. In the POS Keyword Setting, select the camera to enable/disable scanning the keyword.
Enable All to select all cameras.
3. Enter the text below keyword text box. Click Add to include the keyword in the list. To
remove, select the word in the list and click Delete. You may only add 8 keywords. User
can define the color for each keyword. To set the color, click the color panel after next to
POS keyword column and a color selection window will pop up. Select the color that user
wants and click OK.