AVer NX8000 - Manual (Page 69)

62
5.9.2 To Setup the Alarm Sound Setting:
1. Beside the Play Warning Sound check box,
click Detail.
2. In the Alarm Sound Setting dialog box, click
to select other wav file from other source
or folder, Play to listen, Record to make a
new copy of a sound.
3. If you click Record , you will be prompted if
you want to replace the file. Click OK to
continue and Cancel to discontinue.
4. When the Sound Recorder appears, use the
record control panel to record, stop, play,
rewind and forward. If you want to keep the
existing file, click File > Save As…, enter
filename and click Save. Make sure you have
microphone connected to your PC.
5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
5.9.3 To Setup Call Out List:
1. Beside the Make Phone Calls check box,
click Detail.
2. In the Call Out List, click Add to insert a new
contact number, Modify to edit the selected
item, Remove to delete the selected item,
Test
to check if it is working.
3. In the Call Out Setting, enter the phone
number and description. Click to select
existing sound recorded messager and
Record
to make a new voice message.
4. When the Sound Recorder appears, use the
record control panel to record, stop, play,
rewind and forward. If you want to
the existing file, click File > Save As…, enter filename and click Save. Make sure you
have microphone connected to your PC.
The supported audio system is only 8KHz and 16Bit mono.
5. Click
OK
to exit and accept the setting and Cancel to exit without saving the setting.