1 to mask/shield an area on the screen, 2 to show and change the color of the mask, 3 to playback encrypted video – AVer NX8000 User Manual
Page 54: To mask/shield an area on the screen, To show and change the color of the mask, To playback encrypted video
47
would become 10 to 30% more. Enabling the Video Encryption check box, you will be
prompted to enter the password and retype the password for confirmation. Make sure not to
forget the password for you would not be able to decrypt the video without it.
The
symbol would appear on the upper right corner of the encrypted video screen. You
may see the video during live recording (see also
).
i
Only available when user selected “Transcode by MPEG4 Encoder”
in Video Setting at Camera setting section(see
)
5.3.1
To Mask/Shield an area on the screen:
1. In the Mask/Shield Edit section, activate the Enable Mask/Enable Shield check box.
2. In the Edit section, select between Mask or Shield and click the ~ button.
3. Click and drag a frame on the (7) Video Screen to create Mask or Shield area.
i
Only available when user selected “Transcode by MPEG4 Encoder” in Video
Setting
at Camera setting section(see
5.3.2
To show and change the color of the Mask:
1. Enable
the
Show Mask
check box.
2. In the Color section, select the color and click ~button.
5.3.3
To Playback Encrypted Video:
On Playback, Webcam, and Remote Console video screen, just click
and enter the correct
password to decrypt and playback the video.
To encrypt the recoded video back, click
and enter a WRONG password.
i
It is important to encrypt the video again, to avoid unauthorized user viewing the
video.