Sensor setting – AVer NX8000 User Manual
Page 60
53
10. In the Processing… dialog box, to stop archiving press Abort. When done, in the Backup
Path list, shows the archived item. To burn the file in CD, you need to have NERO 6 or
above installed in your PC then select the item in the list and click Burn. Click Exit to end
this procedure and burn it later.
11. In CD/DVD Backup, enable/disable Delete file after burning check box to remove the
archived file after burning. Click Burn to start and Exit to cancel this process.
5.7
Sensor Setting
The I/O device must be installed to use this function.
The DVR system also support external I/O box and user
can install external sensors. For external sensor setting,
please referring to the sensor vendor user’s manual.
To Set the Sensor Setting:
1. Click the drop-down list and select the sensor ID
number.
2. Enter sensor name.
3. Click
External IO
to configure external I/O device if
it is available(see also
)
4. The system automatically detects the sensor and
input relates information. In the Content section,
enter sensor description.
5. In the test section, click Test to check the sensor
status. Red is high and Green is low.
6. Click
OK
to exit and accept the setting and Cancel
to exit without saving the setting.