3 familiarizing the remote console buttons, Familiarizing the remote console buttons – AVer NX8000 User Manual
Page 87
80
8.3
Familiarizing the Remote Console Buttons
(1)
(2)(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(13)
(12)
(14)
(15)
(16)
(17)
Name
Function
(1) DirectDraw
Enhance the video quality.
i
Not all graphic cards can support this function.
(2) Exit
Close the Remote Console.
(3) Volume
Enable/disable the sound.
(4) Split Screen
Mode
Select from six (6) different split screen type to playback the
recorded video file of all the camera, or one camera over the other or
alongside on a single screen.
To view 32 channels, click 16 split screen button to switch channel
display.
i
If there are only 4 cameras, you won’t be able to switch to 9, 16, and 13 split
screen mode.
To change the video quality, right-click on the screen and select between High,
Normal or Low.
(5) Record
Start/stop video recording.
(6) Emap
Display the map in each area, the camera/sensor/relay location and
the warning event. (see also
)
(7) Network
Enable/disable remote system access. This feature allows you to
access DVR server from a remote location via internet connection.
(8) Setup
Configure the Remote Console setting. (see also
)
(9) PTZ
Access PTZ control panel. Beside PTZ camera, NV DVR system
also support mega pixel IP camera.(see
)
(10) Preview
Switch to Preview/Advanced mode. This allows you to view live
camera display.
(11) Playback
Switch to Playback mode. This allows you to view the recorded video
file. (see
)
(12) Status Bar
Display the IP address and received file size.