AVer NX8000 - Manual (Page 73)

66
4. Click OK to accept the new settings and Cancel to exit without saving.
5.9.12 Missing, Suspicious Object, and Scene Change Detected
- Missing Object
Select the certain object on the screen for the system to detect; when the object is
disappear or move and the system will alarm. Click OK to exit and save the configuration.
To exam the setup condition, click Start Test.
1. Select the camera number (0-16) and press RIGHT button on the mouse to call up
the setup windows.
2. Click Save to capture the image for comparing reference first. To view the captured
image, enable the Show Reference Image check box. The captured image will
display on screen. The reference image is sharing with the Suspicious Object and
Scene Change function.
3. Mark the Enable check box to setup the condition.
4. Use the mouse to click and drag the frame on the screen. User can drag more than
one frame.
5. Sensitivity: Set the system detects sensitivity.
6. Delay Time: Set the lasting time for system to detect the object.
7. To reset all object frames, click Clean. To clean an object frame, click right button of
mouse and drag the object frame that user want to clean.
- Suspicious Object
Suspicious Object is including the object missing or the doubtful object appears on the
screen. Click OK to save and exit the setup windows. To exam the setup condition, click
Click to change
color of keyword