AVer NX8000 - Manual (Page 42)

35
(14) UPS (Uninterruptible Power Supply )
Protect the system from damaging, such as power surges or brownouts. This automatically
gives time to close the DVR properly when the battery backup power has reached the
Shutdown when capacity below percentage level setting.
The UPS device must be connected to your computer (refer to your UPS user’s guide)
i The UPS application must meet Windows 2000 or Windows XP system
requirements.
5.1.1 To Set the POS Setting:
1. In the System Setting dialog box, POS section, click Setting. To set the text flow and color
format, click Advance.
2. In the POS Console Setting dialog box, click Add to set a new POS setting, Modify to
change the POS setting, and Delete to remove the selected POS setting. Click OK to
save and close POS Console Setting.
3. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without
saving the new setting.
(4)
(5)
(1)
(2)
(3)
(6)
(7)
(8)
(1) POS Name :
Enter a name to identify the POS.
(2) Protocol : To select the protocol, click Setting button (see Setup POS
Protocol)
(3) Skip first : Set the number of lines you want to be removed
(4) Start Testing :
Click to test POS setting. You will see a test result on the right
side of POS Mapping window.