AVer NX8000 - Manual (Page 76)

69
5.10 User Setting
Only administrator can access User Setting. The maximum user accounts are 256.
In the User Setting dialog box, click Add to insert a new user, Delete to remove the selected
user, Edit to modify the user control right, OK to exit and accept the setting, and Cancel to
exit without saving the setting.
After clicking Add or Edit, you may customize the user control setting. OK to exit and accept
the setting, and Cancel to exit without saving the setting
(1)
(2)
(3)
(4)
(5)
(6)
(7) (8)
(9)
(1) Authorization level
Select the status of the user. Only Administrator-level can access User Setting, and reset the
Alarm status when using the Remote Console.
(2) Control Right
Enable the items that would allow the user to access.
(3) Web Viewer
Enable/disable Web Viewer control right that allow the user to operate from a remote location
using internet explorer.
- Remote Console
Allow the user to remote modify DVR system setting.
- Remote LogViewer
Allow the user to view the event log from remote site.
- Remote EMAP
Allow the user to view the E-map of DVR from remote site.
- IP Camera
Enable/disable user to add new IP camera when using the Web Viewer.