AVer NX8000 - Manual (Page 35)

28
Chapter 5 Customizing the DVR System
In the Preview/Advanced screen mode, click button to customize your DVR. When the
DVR configuration setup selection appears, select and click the buttons you want to change
the setting.
5.1 System Setting
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit
without saving, and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(10)
(11)
(12)
(13)
(14)
(9)
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record
one hour data, the system automatically replaces the oldest data. In case you have more than
one storage path, the system automatically saves the data to the next storage path. You may
also add additional network-attached storage (NAS) for extremely high storage capacity.
Select the Enable network storage check box to send the recorded video in network-attached
storage. To add network storage, the Internet storage drive/folder must be mapped as Network
Driver in DVR server. Enable network storage first, and then, click Add. In Browse For Folder
windows, select drive C and right click mouse button, select Map Network Drive option.