AVer NX8000 User Manual
Page 56
49
(8)
Voice Phone
The Talk to Web-Client is to use the 2-Way Talk feature that allows the client and server to
talk via internet using microphone. Make sure both microphone and speakers work before
using this feature. If the Talk to Web-Client is disabled, the person in the DVR server side can
only hear the voice from the client side that is when the WebCam 2-Way Talk button is
activated. (see also
).
i
Make sure that your Webcam Digital Signature is updated yearly; else you won’t be
able to access the DVR server from the DVR WebViewer. To update/download your
WebViewer Digital Signature, click Update WebViewer Digital Signature. Make
sure your PC is connected to internet.
(9) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address
or domain name. Select Automatic Synchronize time to set automatic synchronize time on a
daily basis. Or, user can click Synchronize Time Right Now to adjust time right away.
(10) Other Configuration
- UPnP
Enable UPnP function to automatically
configure the port setting on the local
network. This function is available when
there is UPNP device in the same network.
It will write the DVR port information into
the router or other network device (see
Appendix B)
- Enable White List
An access permit list for the remote
accessing of DVR server. Enter the IP
address and click Add. Or, enter a range
of IP address and click Add. To delete the
IP from the list, select the IP and click
Delete
button. To reset the input, click
Clear
button.
- Enable HandyViewer
Enable remote users to use a PDA or a mobile phone to access DVR server and select the
video size and quality. (See also
- Network Bandwidth Limit
By Channel:
Set the network bandwidth by each channel.
All:
Set the total network bandwidth consumption limit.