Rate setting in, 5) frame rate – AVer NX8000 User Manual
Page 53
46
detected. When it detects a motion, a green triangle mark would appear at the upper left
corner of the screen.
(4) Frame Rate
Set the maximum number of frames to be recorded during motion and motionless state. The
frame rate ranges from 1 to 30 for NTSC and 1 to 25 for PAL. The higher the frame rate, it
uses more hard disk space.
i
Only available when user selected “Transcode by MPEG4 Encoder”
in Video Setting at Camera setting section(see
)
(5) Video Screen
Display the video of the selected camera
(6) Mask/Shield Edit
Mask, mark an area on the screen to disregards the motion in the marked area and to only
monitor outside the marked area. As for the Shield, it covers an area on the screen and the
covered area would not be visible on the screen and recorded. (see also
)
(7) Information Prompt
Move the mouse to “i” icon for information prompting.
(8) Compression Type
Select from 3 compression types. User can refer the table
below to check the NX card supports what type of
compression. H264 is the latest and advanced video
compression format that delivers better video quality and
smaller file size but this uses more CPU resource. Advanced
MPEG4 and MJPEG, both provide a standard for color picture
compression rate. MPEG4 uses higher compression rate and
smaller file size. While MJPEG uses slightly lower
compression rate and bigger file size.
Using the Advanced MPEG4 enables you to encrypt the
recorded video that way only the person who knows the
password can clearly view the video playback. The file size